Sharp EL-5230 Operation Manual Download Page 60

Page: 60 / 132

Filing Equations

When the calculator is in the NORMAL mode (excluding N-base), you can
save equations in the EQUATION FILE. Saved equations can be loaded or
deleted in the NORMAL mode.

Press

in the NORMAL mode to call the EQUATION FILE menu.

• Press

to select if an

equation is to be loaded, saved or deleted,
respectively.

Saving an equation

You can save an equation as follows.

After entering an equation in the NORMAL
mode, press

in the EQUATION FILE

menu.

• The file name display appears asking you

to enter a title.

• The calculator automatically locks ALPHA on to enable you to enter

alphabetic characters easily. To cancel the ALPHA setting, press

;

Enter the title of the file (up to seven
characters).

• If you change your mind and no longer

want to save the equation, press

Press

to save the equation.

• The display returns to the display before pressing

Note:

•

When saving an equation, local variables (including their values)
used in the equation are saved at the same time.

<EQTN FILE>
ƒLOAD ⁄SAVE
¤DEL

SAVE:TITLE?

SAVE:RING_

“RING” is entered as the
file name.

Chapter 3: Scientific Calculations

Summary of Contents for EL-5230





































































































































Search results

Summary of Contents for EL-5230

Reviews:

Related manuals for EL-5230

Brands by name

Popular brands

Sharp EL-5230, Operation Manual

Search results

Summary of Contents for EL-5230

Reviews:

Related manuals for EL-5230

Brands by name

Popular brands