Sharp DX-B351PL User Manual Download

Page: 53 / 71

8.2.

Toner cartridge and drum component maintenance

8.2.1.

About toner cartridge and drum component

1. Application and maintenance of toner cartridge

Please use the original toner cartridge for better printing quality.

Please pay attention to the following items while using the toner cartridge:

• Do not take the toner cartridge out of its package unless it will be used immediately.

• Do not refill the toner cartridge without permission; otherwise, the damages caused

will not be included in the scope of warranty of the printer.

• Please place the toner cartridge in cool and dry places.

• Please do not place the toner cartridge near ignition sources, as the toner inside it is

inflammable and may cause fire.

• Please pay attention to toner leakage while it is taking out or disassembled. In case of toner

leakage, skin contact with toner or spattering into eyes or mouth, please wash it with clear
water immediately, or see a doctor if feeling unwell.

• Toner cartridge should be placed out of reach of children.

2. Service life of toner cartridge

• The service life of toner cartridge is depending on the toner quantity needed by printing.

• For printers with LED control panel, normally-on orange toner cartridge indicator means that

the service life of toner cartridge has expired, and a new toner cartridge should be replaced.

• For printers with LCD control panel, normally-on orange toner cartridge indicator or “Ctg life

expired” displayed on LCD display means that the service life of toner cartridge has expired,
and a new toner cartridge should be replaced.

3. Service life of drum component

• For printers with LED control panel, normally-on red drum component indicator means that

the service life of drum component has expired, and a new drum component should be replaced.

• For printers with LCD control panel, “Drum Unit Life End” displayed on LCD display means that

the service life of drum component has expired, and a new drum component should be replaced.

8.2.2.

Replace toner cartridge and drum component

Note

Please pay attention to the following matters before replacing toner cartridge:

• Since there may be toner on the surface of toner cartridge, please pay

attention while taking it out to avoid spattering.

• Please place the toner cartridge taken out on paper to avoid large-scale spattering

of toner.

• When installing, do not touch the surface of the toner cartridge, so as to avoid

scratching it.

Summary of Contents for DX-B351PL








































































Search results

Summary of Contents for DX-B351PL

Reviews:

Related manuals for DX-B351PL

Brands by name

Popular brands

Sharp DX-B351PL, User Manual

Search results

Summary of Contents for DX-B351PL

Reviews:

Related manuals for DX-B351PL

Brands by name

Popular brands