background image

13

GB

Remote control

1

2

3

Replace the compartment
cover.

Install two R-03 (“AAA” size, UM/
SUM-4, HP-16 or similar) batteries
(supplied), paying attention to the
polarity diagram in the battery
compartment.

Open the battery compartment
cover in the direction of the
arrow.

How to install the batteries

Use 

micro batteries

 

type R-03 (“AAA” size, UM/SUM-4, HP-16 or similar)

.

These batteries are offered as carbon / zinc-type or as alkaline-type. You may use both, but do not mix types. The
alkaline type lasts longer compared to the carbon / zinc type but is more expensive.

Note:

Flat, weak batteries will leak. 

Corrosive

 electrolyte will 

damage

 the remote control handset.

Leak proof batteries will not leak immediately when they are flat. As long as the handset is still working, there is
no danger of leakage. To prevent damage, remove the batteries if you do not use the handset for several
months.

Damage because of leakage is not covered by the guarantee.

Distance of Remote
Control Operation

Effective angle:
approx. 60

°

approx.

5m

Point the remote
control directly at the
remote sensor.

If bright sunlight
directly beams
onto the unit
front.

If an obstacle is
placed between the
unit and the handset.

The remote control handset will not work properly in the following cases:

If the batteries have not
been installed according to
their polarities.

If the batteries are
weak.

Summary of Contents for DV-RW250S





















































































Reviews: