27
GB
Replace TV station positions
You can replace the channel positions as you like.
Example: Replace the TV station No. 6 with position
No. 2.
1
Select “CH TUNING” and press
ENTER
.
2
Select “CH” and press
ENTER
. Then select the
moving channel position number (6) and press
EN-
TER
.
3
Select “MOVE” and press
ENTER
.
4
Select the channel position number (2) to which
the selected position at step 2 above is to be moved
and press
ENTER
. Now these channel positions
were replaced with each other.
CH
6
SKIP
OFF
DECODER
OFF
MOVE
6
CH
6
SKIP
OFF
DECODER
OFF
MOVE
6
Manual TV station presetting
The Automatic station presetting function (See page
26) memorises the available broadcasts to suitable CH
positions.
Some broadcasts may not be preset correctly by the
automatic tuning system - in this case you can tune
stations manually as follows.
Example: Presetting a station on program position 5.
1
Select “CH TUNING” and press
ENTER
.
2
Select “CH” and press
ENTER
. Then select the
channel position number (5) and press
ENTER
.
3
Select “TUNING” (tuning scale) and press
ENTER
.
CH
5
SKIP
OFF
MOVE
5
TUNING
DECODER
OFF
4
Press
A
(rising frequency) or
B
(falling frequency)
once. The search starts. It stops at each broadcast
automatically. (“
A
” changes to “
”) Press
B
or
A
repeatedly until the desired station appears. If the
broadcast is too weak (eg. with a drifting picture),
the search will not stop. If you want to stop, press
C
/
D
or
B
/
A
.
5
If the tuned-up picture is not satisfactory, press
C
or
D
until the best picture is achieved. Then press
ENTER
.
6
Repeat the steps
2
and
5
to preset other TV sta-
tions.
NOTE:
Occasionally, the auto search might catch a weak sig-
nal and stop. If the TV station signal is weak, you
shouldn't store this station. In that case restart the auto
search using
B
or
A
.
CH
ENTER
RETURN
SETUP
BACK
END
SEARCH
F. TUNE
5
SKIP
OFF
OFF
MOVE
5
TUNING
ENTER
DECODER
CH
5
SKIP
OFF
MOVE
5
DECODER
OFF
Setting the channel
