57
GB
Timer Recording/The GUIDE Plus+
®
System
Configure the GUIDE
Plus+ System
You can configure the GUIDE Plus+ system
from the “Setup” Area.
Here, you can set/change your language,
country and postal code. Also you can add/
change your external receivers details. These
can be done in the “Setup” area.
The entries for “Language” and “Country” are
imported from your earlier selection, during
“Auto Installation” or from “OSD Language”
under “Start Menu” or during Setup of the
GUIDE Plus+ System. You can change them
if necessary.
The entry for “Postal Code” is essential in
order to receive TV listings data.
The settings for “External Receivers” must be
done if you use the GUIDE Plus+ system with
an external receiver. Select appropriate
options on the screen.
For example: Changing the Postal Code in
your Recorder:
1
Press
GUIDE
to display the
GUIDE Plus+ screen.
2
Press
'
/
"
/
\
/
|
to select
“Setup”, then press
SET/ENTER
twice.
NOTE
• It is very important that you enter correct
settings for the country and post code for
your current domicile in order to receive TV
listings correctly.
• Some changes (e.g. country, postal code)
might require a new download of TV listings
information. This can take up to 24 hours.
• When TV listings data is being down-
loaded, the Front Panel Display appears as
follows:
Country
Language
France
Postal Code
None
External Receiver 1
None
External Receiver 2
None
External Receiver 3
None
English
BBC2 1-Sep 16:45
Home
Setup
Press
'
or
"
to select. Then press ENTER to
confirm.
Settings
3
Press
'
/
"
to highlight the part
that you would like to change,
then press
SET/ENTER
.
4
Press the
Number
buttons or
'
/
"
to make your changes, then
press
SET/ENTER
to confirm.
HR480F_GB-045-057
05.4.25, 5:16 PM
57
