21
GB
Operating a TV Using the
Remote Control
(Universal Remote Control)
The Universal Remote Control may operate the
basic functions of 18 different types of TVs.
To enter the Manufacturer’s Code for your TV,
follow the instructions below.
There is no guarantee that the universal
remote control will function with your TV.
Setting the
Manufacturer’s Code
1
Press
OPERATE
of TV CON-
TROL and
CH
'
of TV
CONTROL simultaneously.
2
Enter the 2-digit Manufacturer’s
Code with the
Number
buttons
(Ex. 02-“0”, “2”) within 10
seconds after releasing
OPERATE
of TV CONTROL and
CH
'
of TV CONTROL.
3
Point the remote control unit
towards the TV and then press
OPERATE
of TV CONTROL.
• If the TV turns on/off, setup was
successful. If not, repeat the proce-
dure using another code.
Major Components
NOTE
• If the batteries in the remote control unit are
replaced, the code settings must be re-
entered.
• Some brands have more than one code
listed above, due to changes in the codes.
In such cases, try another code to find the
code that operates your TV.
TV function control
• TV Power: OPERATE
• TV Channel up/down: CH
'
'
'
'
'
/
"
"
"
"
"
• TV Volume up/down: VOL +/-
• TV-AV Selector: INPUT
See the list below for the Manufacturer’s Code
and the buttons which work.
TV Brand
Manufacturer’s Code
FERGUSON
07
GRUNDIG
06
HITACHI
13
ITT NOKIA
08
JVC
15
LOEWE 1
17
LOEWE 2
18
MITSUBISHI
16
PANASONIC 1
11
PANASONIC 2
12
PHILIPS
03
SANYO
14
SHARP 1
01
SHARP 2
02
SONY
09
THOMSON 1
04
THOMSON 2
05
TOSHIBA
10
HR480F_GB-015-022
05.3.23, 1:44 PM
21
