Sharp DV-HR300X Operation Manual Download

Page: 32 / 108

Time Shift Viewing

HDD

Press

TIME SHIFT

while

viewing a programme.

• Pause screen will be displayed in a

few seconds.

• Press

■

STOP/LIVE

to return to

current (live) broadcast.

Press

PLAY

• Playback starts from the position you

paused.

• Press

STILL/PAUSE

to pause

playback (Still Playback).
To cancel Still Playback, press

STILL/PAUSE

PLAY

Press

REV

FWD

during Time Shift Viewing.

• Each time you press the buttons, the

Fast Reverse/Forward Playback
speed changes as shown below.

Example:

When

FWD

is pressed

once

• Press

PLAY

to return to the normal

playback speed.

Press

■

STOP/LIVE

to return to

the current (live) broadcast.

• Time Shift Viewing will be cancelled,

and the automatically recorded
content will be erased.

NOTE

• Time shift viewing will stop in the following

cases.
•

TIME SHIFT

■

STOP/LIVE

pressed.

• HDD remaining capacity is gone.
• The broadcast whose recording is

prohibited is received.

Time Shift Viewing/Chasing Playback

(Approx. 2

)

(Approx. 32

)

(Approx. 8

)

Chasing Playback

HDD

Press

PLAY

during recording.

• Playback starts from the beginning of

the programme being recorded.
(Chasing Playback)

• Press

STILL/PAUSE

to pause

playback (Still Playback).
To cancel Still Playback, press

STILL/PAUSE

PLAY

Press

REV

FWD

during Chasing Playback.

• Each time you press the buttons, the

Fast Reverse/Forward Playback
speed changes as shown below.

Example:

When

FWD

is pressed

once

• Press

PLAY

to return to the normal

playback speed.

Press

■

STOP/LIVE

to return to

the live broadcast which is being
recorded.

(Approx. 2

)

(Approx. 32

)

(Approx. 8

)

Pause icon

(This will become a square icon during
Time Shift Viewing.)

Play icon

Fast Forward Playback 2

icon

Fast Forward Playback 2

icon

DV-HR350X/300X-031-036

2004.4.8, 1:05 PM

Summary of Contents for DV-HR300X













































































































Search results

Summary of Contents for DV-HR300X

Reviews:

Related manuals for DV-HR300X

Brands by name

Popular brands

Sharp DV-HR300X, Operation Manual

Search results

Summary of Contents for DV-HR300X

Reviews:

Related manuals for DV-HR300X

Brands by name

Popular brands