background image

 

ORDER NO.

PIONEER CORPORATION

   

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

  P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.

PIONEER EUROPE NV

  Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

  253 Alexandra Road, #04-01, Singapore 159936

   PIONEER CORPORATION 2006

STANDBY/ON

VHS EJECT

VIDEO L (MONO) · AUDIO · R

VHS

VHS/HDD/DVD

PAUSE LIVE TV

PLAY

COPY

SELECT

STOP REC

OPEN/CLOSE

AUTO
COPY

REC

VHS

DVD

START

CH

HDD

DVD

INPUT2

PAL SECAM

 

DVR-RT602H-S

 

RRV3429

 

DVD RECORDER

 

DVR-RT602H-S

 

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

 

Model

Type

Power Requirement

Region No.

Remarks

 

DVR-RT602H-S

YXZT5

AC 220 V to 240 V

2

÷

 When servicing this model, some service procedures may reset the customer settings 

  to the factory default settings.  Make sure to explain this to the customer.

An HDD (Hard Disc Drive) is mounted in this product.
The HDD is a precision instrument very vulnerable to shock and electrostatic charges. Please read
 "7.5 Cautions on Handling the HDD" in this manual and exercise sufficient caution when handling the 
HDD itself, as well as the product with the HDD built in.
When an HDD becomes defective and inoperable, restoration of the user's data recorded on the HDD, 
or copying of the user's recorded data to other media (such as a new HDD) is totally impossible.
Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
The user must be made aware that all recorded data are deleted if the HDD is intialized.

For details, refer to "Important Check Points for Good Servicing" . 

 

T-ZZV JUNE   2006 printed in Japan

Summary of Contents for DVR-RT602H-S















































































































































































Reviews: