Sharp DV-HR300X Operation Manual Download

Page: 22 / 108

Basic Connection

Connection Using Antenna Cables and SCART
Cables

The following connection is the basic connection to watch or record TV
programmes.

Important!

• Be sure to turn off and unplug from the AC outlet this Recorder and all

equipment before connecting the cables.

• Read through the operation manual for the equipment to be connected.

Connect the TV antenna
cable to the ANTENNA IN
jack on the rear of this
Recorder.

Connect the ANTENNA
OUT jack on the rear of
this Recorder to the
antenna input jack on your
TV using the supplied
coaxial cable.

Connect the LINE 1(TV)
jack on the rear of this
Recorder to the SCART
input jack on your TV using
the SCART cable (commer-
cially available).

When connecting with your
Satellite receiver or de-
coder

Connect the LINE 2(IN)
jack on the rear of this
Recorder to the SCART
output jack on your VCR
using the SCART cable
(commercially available).

NOTE

• To connect using S-video or

component cables, see “Using
Other Types of Video Output” on
page

Important!

• When connecting to your TV using

SCART cable:

When playing back HDD/DVD, the

recorder side input is selected
automatically. When the channel is
changed at the TV side under this
setting, the selection is normally
changed to the reception channel,
but it may not be changed for
certain TV models. If this happens,
press the

TV/DVD

button on the

remote control.

VCR

The Recorder

To LINE 1(TV)
SCART

To SCART
input

To ANTENNA
IN jack

To ANTENNA
OUT jack

To antenna
input jack

Coaxial cable
(supplied)

Antenna cable
(commercially available)

SCART cable
(commercially
available)

To LINE 2
SCART

To SCART
output

POWER

TV/VCR SET UP

CHANNEL

REC

PLAY

STOP/
EJECT

PAUSE
/STILL

DV-HR350X/300X-022-024

2004.4.8, 1:05 PM

Summary of Contents for DV-HR300X













































































































Search results

Summary of Contents for DV-HR300X

Reviews:

Related manuals for DV-HR300X

Brands by name

Popular brands

Sharp DV-HR300X, Operation Manual

Search results

Summary of Contents for DV-HR300X

Reviews:

Related manuals for DV-HR300X

Brands by name

Popular brands