Sharp AR-C170M, Operation Manual

Page: 54 / 144

SADDLE STITCH FINISHER
3-6
Using the saddle stitch finisher
Touch the [Output] key on the main screen of copy mode to display the screen that allows selection of sort, staple
sort, centreline stapling, group function, and the output tray.
[GROUP] key (See page 3-4.)
When Group is selected, all copies of the same
original will be grouped.
[STAPLE SORT] key (See page 3-4.)
When Staple Sort is selected, sorted sets will be
stapled and delivered to the offset tray. (They will
not be offset stacked.)
[SORT] key (See page 3-4.)
When Sort is selected, sets of copies will be
sequentially delivered.
[FINISHER TRAY] key (See page 3-2.)
When the offset function is selected, output goes to
the offset tray. (The offset tray is automatically
selected when the staple sort function is turned
on.)
[OFFSET] key (See page 3-4.)
The offset function operates when "Yes" is
selected, and doesn't operate when "No" is
selected. (The offset checkmark is automatically
cleared when the staple sort function is turned on.)
[CENTRE TRAY] key
If the centre tray is selected, output paper will be
delivered to the exit tray located above the main
unit.
[OK] key
Touch to close the [OUTPUT] screen and to return
to the main screen.
[SADDLE STITCH] key (See page 3-5.)
When saddle stitching is selected, the copies will
be stapled at the centre and delivered to the saddle
stitch tray.
Touch this key to display the pamphlet copy setting
screen (page 6-25). (This is only possible when a
checkmark appears in the checkbox of the
[AUTOMATIC SADDLE STITCH] key operator
program (see page 12 of the Key operator's
guide.))
[PUNCH] key (See page 3-5.)
If the saddle stitch finisher is equipped with a hole
punch module, printed paper can be hole punched
and delivered to the offset tray.
* When one of the functions is selected, it is
highlighted.
OUTPUT
OK
SADDLE
STITCH PUNCH
FINISHER
TRAY
CENTRE
TRAY
STAPLE
SORT
SORT
GROUP
OFFSET
Apollon_general-copy_EX.book 6 ページ ２００４年６月７日 月曜日 午後１時５９分