Sharp AR-C170M Operation Manual Download Page 113

Page: 113 / 144

COLOUR ADJUSTMENTS MENU

6-15

Brightness

This copier allows the level of brightness of images to be adjusted.

Touch the [BRIGHTNESS] key on the
COLOUR ADJUSTMENTS menu screen.

The BRIGHTNESS
setting screen will
appear.

Adjust the brightness.

Use the [-] and [+] keys to adjust the level of the
BRIGHTNESS.

When the key is touched, the colour adjustments
menu icon (

) will appear at the upper left of the

screen to indicate that the function is turned on.

Touch the [OK] key (inside [OK] key) on
the BRIGHTNESS setting screen.

Return to the COLOUR ADJUSTMENTS menu
screen.

Touch the [OK] key on the COLOUR
ADJUSTMENTS menu screen.

Return to the SPECIAL MODES screen.

Touch the [OK] key on the SPECIAL
MODES screen.

Return to the main screen of copy mode.

Intensity

This copier allows the level of intensity of images to be adjusted.

Touch the [INTENSITY] key on the
COLOUR ADJUSTMENTS menu screen.

The INTENSITY setting
screen will appear.

Adjust the intensity.

Use the [-] and [+] keys to adjust the level of the
INTENSITY.

When the key is touched, the colour adjustments
menu icon (

) will appear at the upper left of the

screen to indicate that the function is turned on.

Touch the [OK] key (inside [OK] key) on
the INTENSITY setting screen.

Return to the COLOUR ADJUSTMENTS menu
screen.

Touch the [OK] key on the COLOUR
ADJUSTMENTS menu screen.

Return to the SPECIAL MODES screen.

Touch the [OK] key on the SPECIAL
MODES screen.

Return to the main screen of copy mode.

SHARPNESS

BRIGHTNESS

BAC

CANCEL

COLOUR
ADJUSTMENTS

BRIGHTNESS

-2

About the steps that follow

If the reversing single pass feeder is being
used, see pages 5-2 through 5-6. If the
document glass is being used, see pages 5-7
through 5-9.
In either case, press the [COLOUR COPY
START] key to begin copying.

To cancel the BRIGHTNESS function, select the
BRIGHTNESS function again and touch the
[CANCEL] key (step2).

ESS

SUPPRESS

BACKGROUND

INTENSITY

CANCEL

COLOUR
ADJUSTMENTS

INTENSITY

-2

About the steps that follow

To cancel the INTENSITY function, select the
INTENSITY function again and touch the [CANCEL]
key (step 2).

Apollon_general-copy_EX.book 15

ページ

２００４年６月７日　月曜日　午後１時５９分

Summary of Contents for AR-C170M

















































































































































Search results

Summary of Contents for AR-C170M

Reviews:

Related manuals for AR-C170M

Brands by name

Popular brands

Sharp AR-C170M, Operation Manual

Search results

Summary of Contents for AR-C170M

Reviews:

Related manuals for AR-C170M

Brands by name

Popular brands