Sharp AR-C170M, Operation Manual

Page: 17 / 144

PART NAMES AND FUNCTIONS
1-7
1
■ ■ ■ ■
Other optional equipment
●
● ●
●
Network scanner expansion kit (AR-NS2)
This kit is required to add the network scanner
function*.
* To use the network scanner function, the
network scanner expansion kit (AR-NS2),
scanner interface board (AR-EB8), and 256 MB
or more of optional memory must be installed.
●
● ●
●
Facsimile expansion kit (AR-FX10)
This kit must be installed to use the fax function.
●
● ●
●
Fax memory (8 MB) (AR-MM9)
This adds memory for use by the fax function.
● ● ● ●
256 MB optional memory (AR-SM5)
This adds memory for use by the copy function.
■ ■ ■ ■
Face-up and face-down output
After printing, the paper is delivered to the exit tray. This product has two exit trays (centre tray and left tray). The
paper specifications (page 8-3) and output conditions differ for each tray; however, if the paper and output
conditions are such that the paper can be delivered to either tray, you can select the tray to which the paper will
go.
●
Paper exits to the centre tray face-down only.
●
Paper exits to the left tray face-up only. However, if a duplex bypass/inverter unit has been installed, face-
down output is also possible. In this case, face-up or face-down output is automatically selected according to
the paper and output conditions (it is not possible to manually select face-up or face-down.)
Apollon_general-copy_EX.book 7 ページ ２００４年６月７日 月曜日 午後１時５９分