8-18
CHAPTER
8
Staple Position Setting
This program is used to select the initial stapling position for the
optional finisher (AR-FN1N only).
When the “STAPLE POSITION SETTING.” key is pressed, the following
display will appear.
1.
Select the desired stapling position on the touch panel.
2.
Press the “OK” key.
Date Format Setting
This program is used to set the initial date format for the date function.
When the “DATE FORMAT SETTING.” key is pressed, the following
display will appear.
1.
Select the desired date format on the touch panel.
2.
Press the “OK” key.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
STAPLE POSITION
SETTING.
OK
KEY OPERATOR PROGRAMS
23 April, 1998
April 23, 1998
23/04/98
04/23/98
DATE FORMAT SETTING.
OK
KEY OPERATOR’S GUIDE
Key operator programs
