Sharp AR-250 Operation Manual Download

Page: 102 / 178

6-4

CHAPTER

PART NAMES AND FUNCTIONS

LCD touch panel

Displays information to assist the operator.

Various operation keys are included in the touch

panel depending on the particular screen being

displayed.

10-key pad

Used to set the copy quantity.

INTERRUPT (

) key and indicator (p. 2-20)

Interrupts a copy run.

CLEAR ALL (

) key

Clears all selected settings and returns the copier

to the initial settings.

COPY key

Press during standby to display the total output

count.

AUDIT CLEAR (

) key

Closes an open account.

PROGRAM (

) key (p. 2-18)

Press to select the job memory mode.

CLEAR (

) key

Press to clear the copy quantity display, or press

during a copy run to terminate copying. The

copier will stop after copies in progress are

finished.

START (

) key and indicator

Copying is possible when the indicator is on.

Press to start copying.

SPECIAL MODES key (p.3-1)

Press to select special functions.

Message display

Messages are displayed regarding copier status

and operation.

Paper size display

The sizes of loaded copy paper are displayed and

the selected paper feed location is highlighted.

indicates the amount of copy paper.

Copy quantity display

Displays the specified number of copies.

Original size display

The original paper size is displayed.

INFORMATION (

) key (p. 1-7)

Press for operation guidance on use of various

features of this copier.

Press for guidance when a misfeed occurs, when

adding toner, or when used toner must be

disposed of.

GENERAL INFORMATION

Part names and functions

CLEAR

PROGRAM

AUDIT CLEAR

INTERRUPT

CLEAR ALL

START

COPY

DATA

ON LINE

The key and indicators
are not used for the
copier features.

Operation Panel

Summary of Contents for AR-250



















































































































































































Search results

Summary of Contents for AR-250

Reviews:

Related manuals for AR-250

Brands by name

Popular brands

Sharp AR-250, Operation Manual

Search results

Summary of Contents for AR-250

Reviews:

Related manuals for AR-250

Brands by name

Popular brands