Main
code
Sub
code
Contents
Details of operation
Initial
value
Set range
3
2
Shifter job separator
sensor operation check
<Only when a job
separator shifter>
Used to check the sensors state in the shifter job separator with the
LED on the operation panel.
3
Shifter operation check
<Only when an shifter
is installed>
Used to drive the shifter motor at the speed of printing of A4 (8-1/2
×
11"). Pressing the clear all key or interrupt key moves the shifter to the
home position.
4
Job separator operation
check
<Only when an Job
separator is installed>
Used to drive the job separator one way. Pressing the clear all key or
interrupt key stops the job separator at the home position.
11
Shifter Home Position
check
<Only when a sifter is
installed>
Used to drive the shifter motor
5
1
Operation panel display
check
Used to light all LED’s on the operation panel for 5 sec.
2
Heater lamp lighting
check, cooling fan motor
operation check
Used to turn ON the heater lamp for 500 msec and OFF for 500 msec 5
times. At the same time, the cooling fan is rotated at a high speed. After
checking the heater lamp operation, the cooling fan motor rotate at a low
speed.
3
Copy lamp lighting check
Used to light the copy lamp for 10 sec.
6
1
Paper feed solenoid
operation check
When the start key is pressed, the selected paper feed solenoid is
driven at the cycle of 500 msec ON and 500 msec OFF 20 times.
10
Main cassette semi-
circular roller drive
Excute the simulation with the developer cartridge removed, used to
rotate the semi-circular roller of the main cassette one turn to face it
downward.
Display
<Lighting at sensor ON>
Shifter HP sensor: Machine position JAM LED
Job separator HP sensor: SPF JAM LED
Paper exit full sensor: 2nd tray position JAM LED
Key operation
The shifter is moved to the home position: Clear all key, interrupt key
Key operation
Stops at the home position: Clear all key, interrupt key
Key operation
Feed: Exposure up key or "3" key
Return: Exposure down key or "4" key
Move to Home Position: Magnification ratio display key or "5" key
Key operation
Display
Solenoid selection:
Tray
select
button
<Lighting at solenoid selection>
Main cassette paper feed solenoid:
Main cassette select LED
Multi manual paper feed solenoid:
Manual paper feed select LED
No. 2 cassette paper feed solenoid:
No. 2 cassette select LED
No. 3 cassette paper feed solenoid:
No. 3 cassette select LED
<Only when an option is installed>
No. 4 cassette paper feed solenoid:
No. 4 cassette select LED
<Only when an option is installed>
Resist roller solenoid:
Machine
position
JAM
LED
No. 2 cassette transport solenoid:
No. 2 cassette position JAM LED
No. 3 cassette transport solenoid:
Machine position JAM LED + No. 2
cassette position JAM LED
<Only when an option is installed>
No. 4 cassette transport solenoid:
JAM LED
<Only when an option is installed>
AR-162 SIMULATIONS – 3
