3. Operation Section
1
INTERRUPT key and indicator
2
Copy quantity display
3
ZOOM indicator
4
Copy ratio display key
5
Zoom keys
6
PAPER SIZE ENTER key
7
AUDIT CLEAR key
8
PAPER SIZE indicators
9
Alarm indicators
∗
2
10
POWER SAVE indicator
11
SPF/RSPF indicator
12
Output tray full indicator
13
B/W REVERSE key and indicator
14
XY-ZOOM key and indicator
15
SORT/GROUP key and indicators
16
ORIGINAL DATA indicator
17
2 IN 1 / 4 IN 1 key and indicators
18
AUTO/MANUAL/PHOTO key and
indicators
19
Light and dark keys and indicators
∗
3
20
Numeric keys
21
Zero key
∗
4
22
CLEAR key
23
START key and indicator
24
CLEAR ALL key
25
PRESET RATIO selector keys and
indicators
26
ORIGINAL SIZE ENTER key and
indicators
27
AUTO PAPER SELECT indicator
28
TRAY SELECT key
29
AUTO IMAGE key and indicator
30
Paper feed location/misfeed location
indicators
31
DUAL PAGE COPY key and indicator
32
ERASE key and indicators
33
MARGIN SHIFT key and indicator
34
ORIGINAL TO COPY key and indicators
∗
1
ON:
Indicates that the machine is in the energy saving (pre-heat)
mode.
Blink: Indicates that the machine is in the process of resetting from
the energy saving mode or just after supplying the power.
(During warmup)
OFF: Indicates that resetting from the energy saving mode is com-
pleted and that the fusing temperature is in ready state.
The combinations of the above display lamps are as follows:
( = ON, = OFF)
Lamp
Immediately after
power ON
Ready
Copying
Pre-heat lamp
Blink
Ready lamp
Other lamps
Lamp
Energy
saving mode
(Pre-heating)
Energy
saving mode
(Auto power
shut off)
Resetting
from energy
saving mode
Copy is
started during
resetting from
energy saving
mode
Pre-heat lamp
Blink
Blink
Ready lamp
Other lamps
∗
2
Maintenance indicator
When the set count number (set by the simulation) is reached,
the lamp lights up. The machine does not stop.
Toner cartridge replacement required indicator
When toner density is lower than a specified level, the TONER
CARTRIDGE REPLACEMENT indicator lights up to warn the
user.
If toner is not added after approximately 10% is copied, the
indicator starts blinking and machine starts to supply toner.
(Toner cartridge replacement indicator keeps lighting up)
If toner density is not back to specific level after two minutes, the
READ indicator goes out and Toner indicator starts blinking, and
the copier stops.
Developer replacement required indicator
(1) Lights up when the developer counter reaches 30K.
(2) Selection between STOP and NON-STOP is allowed with the
service simulation No.
(Default: NON-STOP)
Paper required indicator
Misfeed indicator
∗
3
Light key
Press and hold this key for 5 sec, and the machine will enter the
user program mode.
∗
4
Zero key
Press and hold this key, and the total output counter value is
displayed on the copy quantity display.
Not used for the copier features.
1
2
3
4
5
6
7
8 9 10 1112
13 14 15 16
17
18 19
20
22 23 24 25
26
27 28 29 30
31
32
34
33
21
AR-162 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 11/21/2000
AR-162 EXTERNAL VIEWS AND INTERNAL STRUCTURES – 2