5
Attaching the stand unit
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.
1
Confirm that there are screws with the stand
unit.
1
For 60 inch models
(four long screws, five middle screws and two
short screws)
2
For 52 inch models
(four long screws, four middle screws and one
short screw)
2
Attach the supporting post for the stand unit
onto the base using the long screws with a
screwdriver as shown.
Supporting
post
60 inch models
52 inch models
3
Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Soft cushion
60 inch models
52 inch models
4
Insert and tighten middle screws into the holes
on the rear of the TV.
60 inch models
52 inch models
5
Attaching the stand cover.
1
Insert the stand cover.
2
Insert and tighten the short screw(s) into the
hole(s) of the stand cover.
60 inch models
52 inch models
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• The TV can be rotated up to 20 degrees to the right and
left.
Preparation
Summary of Contents for Aquos LC-52LE830E
Page 85: ......
