61
Wireless installation
Use the wireless LAN USB adapter supplied with the
TV.
E
Wireless connection overview
PC
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
NOTE
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
E
How to connect
1
Switch on your router before starting the
network installation.
2
Connect the wireless LAN USB adapter
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
• Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
3
Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “Connection type”.
4
Press
c/d
to select “Wireless”, and then press
;
.
5
Select “OK” to confirm.
6
Press
a/b
to select “Wireless setup” in the
“Network setup” menu.
7
Press
c/d
to select “Change”, and then press
;
.
8
Press
a/b
to select “WPS”, and then press
;
.
WPS
Search
Manual Setup
• If your router/access point does not support WPS
(= Wi-Fi Protected Setup), select “Search” and
follow the on-screen instructions and the operation
manual of the router/access point.
• To establish the connection manually, select
“Manual setup” and follow the on-screen
instructions and the operation manual of the router/
access point.
9
Press
a/b
to select “Push button”, and then
press
;
.
Push button
PIN code
• To establish the connection manually, select “PIN
code”. Follow the on-screen instructions and the
operation manual of the router/access point.
0
Select “Next” to proceed.
Q
Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait
until the connection is established.
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in the
above operation, an error message will appear. In
this case, press
ATV
/
DTV
/
SAT
/
b
to return to the
normal TV screen and check the relevant settings.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• There is no need to enter the security key for
subsequent connections to the wireless network.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
• If you want to change the IP settings manually, go to
“Menu” > “Setup” > “View setting” > “Network setup” >
“IP setup” and follow the on-screen instructions and the
operation manual of the router.
• See page 79 to check the supplied SHARP wireless LAN
adapter specifications.
Network setup
Summary of Contents for Aquos LC-52LE830E
Page 85: ......
