Sharp Aquos LC-45GD1E Operation Manual Download Page 79

Page: 79 / 88

Useful features

TOP Overview screen

BLOCK PAGES

TV PROGRAMS
COLOR BAR
WEATHER
NEWS
MOVIE
LOCAL

SPORTS

BLOCK 1
BLOCK 2
BLOCK 3

GROUP PAGES

FOOT BALL
BASKETBALL

TENNIS

SKI
JUDO
SWIM
GROUP 1
GROUP 2
GROUP 3
GROUP 4

I N D E X

Displaying Subtitle

You can display several subtitles as they are
transmitted.

Press

[

to display the subtitle.

• Subtitle is updated by the information sent by

the broadcasting station.

• To stop updating Subtitle automatically, press

Press

[

to exit the subtitle screen.

Displaying TOP Overview

When receiving TOP Teletext, you can read a TOP text
overview.

Press

to display Teletext.

Press

to display the TOP Overview as

shown below.

Select the desired block or group by using

Press

to display the selected block or

group pages.

Press

to exit the TOP Overview screen.

NOTE

• Subtitle will not be displayed when the service does not

contain the subtitle information.

Time display

You can display the time information included in the
DTV and Teletext broadcasts.

Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)

Press

. The channel display will appear

on the Display.

Press

again within the three-second

interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.

Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.

NOTE

• The time display cannot be stored once the power is

turned off. When you turn on the power, perform steps 1 –
4 again.

• If acquired successfully, the time information will appear

in the upper-right corner of the screen by pressing

MENU

• The information acquired from DTV broadcasts is also

determined by the values you set in “Time Zone” (page
32) and the Daylight Saving Time information included in
the “Country” setting (page 41).

NOTE

• Skip step 1 if receiving DTV broadcasts.

LC-45GD1E(E)-l

04.9.27, 10:24 AM

Summary of Contents for Aquos LC-45GD1E

























































































Search results

Summary of Contents for Aquos LC-45GD1E

Reviews:

Related manuals for Aquos LC-45GD1E

Brands by name

Popular brands

Sharp Aquos LC-45GD1E, Operation Manual

Search results

Summary of Contents for Aquos LC-45GD1E

Reviews:

Related manuals for Aquos LC-45GD1E

Brands by name

Popular brands