17
INPUT 1 (SCART)
INPUT 3
(Y, P
B
(C
B
)
,
P
R
(C
R
))
INPUT 2 (SCART)
DISPLAY OUTPUT 3
DISPLAY OUTPUT 1
AC INPUT
RS-232C**
INPUT 3 (SCART)
AV OUTPUT (VIDEO)
AV OUTPUT
(AUDIO)
*
Press
RESET
if the system cannot return to its original state after performing various operations.
This will reset the System as shown below.
• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
**
Press
SYSTEM RESET
if the system does not operate after starting up.
NOTE
• Pressing
RESET
will not work if the System is in standby mode (indicator lights red).
• Pressing
RESET
will not delete channel preset and PIN. See page 73 for resetting the PIN when you know it. See page
85 for initialising to the factory preset values when you forget your PIN.
ANTENNA INPUT
Part names
AVC System
DISPLAY OUTPUT 2
Front view
Rear view
DC OUTPUT
DIGITAL AUDIO
OUTPUT*
SPEAKER-B
DIGITAL ANTENNA INPUT
DIGITAL ANTENNA OUTPUT
*Connect a digital audio equipment.
**Provided for command from PC (see pages 80 and 81).
COMMON
INTERFACE slot
RESET*
POWER button
INPUT 4 (S-VIDEO)
INPUT 4 (VIDEO)
SYSTEM RESET**
INPUT 4 (AUDIO L/R)
How to open the door
.
STANDBY/ON indicator
PC CARD slot
CARD indicator
Headphone
(When connecting headphones, the sound from the speakers is muted.)
INPUT 5 (AUDIO)
INPUT 5 (DVI-I)
CENTRE CHANNEL
INPUT
• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
LC-45GD1E(E)-b
04.9.27, 9:59 AM
17
