Sharp Aquos LC-42D64UA Operation Manual Download

Page: 18 / 71

Power

Simple operations for watching a TV program

TV POWER

(On/Standby)

Turning on the power

Press

POWER

on the TV, or

TV POWER

on the

remote control unit.

• POWER indicator (Green): The TV is on. (After a few

seconds, a window appears with sound.)

NOTE

• The initial setup starts when the TV powers on for the fi rst

time. If the TV has been turned on before, the EZ Setup will
not be invoked. See page 23 for performing EZ Setup from
the Setup menu.

Turning off the power

Press

POWER

on the TV, or

TV POWER

on the

remote control unit.

• The TV enters standby and the image on the screen

disappears.

• The POWER indicator on the TV turns off.

NOTE

• If you are not going to use this TV for a long period of time,

be sure to remove the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is

turned off.

Watching TV

TV status indicator (POWER)

Lighting (Green)

Lights off

Standby

“Off” is selected in OPC setting

“On” or “On: Display” is selected in OPC setting

Lights off

Lighting (Green)

TV status indicator (OPC)

• See page 26 for details.

“Off” is selected in SLEEP setting

“30”, “60”, “90” or “120” is selected in SLEEP setting

Lights off

Lighting (Red)

TV status indicator (SLEEP)

• See page 34 for details.

POWER

indicator

SLEEP

indicator

OPC

indicator

LC52̲46̲42D64U.indb 16

2007/07/03 10:29:07

Summary of Contents for Aquos LC-42D64UA








































































Search results

Summary of Contents for Aquos LC-42D64UA

Reviews:

Related manuals for Aquos LC-42D64UA

Brands by name

Popular brands

Sharp Aquos LC-42D64UA, Operation Manual

Search results

Summary of Contents for Aquos LC-42D64UA

Reviews:

Related manuals for Aquos LC-42D64UA

Brands by name

Popular brands