19
FM Radio menu screen
Press the
RADIO
button on the remote control unit to listen
to FM radio. To use this function, you must first insert the
antenna cable into the corresponding FM antenna connector.
E
Radio Setting
You can make adjustments for FM radio broadcasting by
using
RADIO
on the remote control unit.
1
Press
RADIO
to display the RADIO menu screen.
2
Press
a
/
b
to select the preset radio channel.
3
Press
c
/
d
to adjust the volume.
4
Press
END
to exit the RADIO menu screen.
E
Auto Station Search
You can search automatically for and store stations.
1
Press
RADIO
to display the RADIO menu screen.
2
Press
OK
, and then “WARNING: RADIO STATIONS
WILL BE ERASED” is displayed.
3
Press
OK
to start station search.
• The unit searches for radio programmes and stores and
sorts all programmes found (according to set defaults).
• The search may take several minutes.
4
Press
END
to exit the RADIO menu screen.
• To delete, edit or change the order of radio programmes,
refer to “EDIT” on page 8 and 16.
E
Manual Station Search
You can search manually for and store new stations.
1
Press
RADIO
to display the RADIO menu screen.
2
Press
Red
to search manually for a radio programme.
• Input the two digits
(0-9)
to search for a new radio
programme, and then “RADIO TUNING” is displayed.
3
Press
a
/
b
to select “FREQUENCY” or “SCAN” to
search for stations:
“FREQUENCY” Mode:
1
Press
a
/
b
to select “FREQUENCY”.
2
Press
c
/
d
to search for a frequency or enter the five
digits
(0–9)
of the desired frequency.
3
Press
OK
to store the station.
“SCAN” Mode:
1
Press
a
/
b
to select “SCAN”.
2
Press
c
/
d
to search for the preceding or subsequent
radio programme.
• Search stops as soon as a station is found.
• Press
c
/
d
again until the desired station is found.
3
Press
OK
to store the station.
Useful adjustment settings and features
HD mode adjustments
You can adjust the “PICTURE” and “SOUND” modes to your
preference setting when your TV receives HD signal image.
1
Press
b
on the remote control unit to display the
“EXT. SOURCES MENU” screen.
2
Press
a
/
b
to select “EXT4” or “EXT5”, and then press
OK
.
3
For PICTURE setting:
Press
MENU
or
Red
to display PICTURE setting.
1
Press
a
/
b
to select your desired PICTURE item.
(CONTRAST/BRIGHTNESS/COLOUR/SHARPNESS/
HDMI SETUP*/DVI SETUP VIA HDMI*)
* HDMI SETUP or DVI SETUP VIA HDMI are available
only for EXT 5. Press
a
/
b
to select the desired item,
and then press
OK
. (See page 17.)
2
Press
c
/
d
to adjust the item to your desired position.
3
Press
END
to exit.
For SOUND setting:
Press
Green
to display SOUND setting.
1
Press
a
/
b
to select your desired SOUND item.
(VOLUME/BALANCE/LOUDNESS/DYNAMIC BASS/
MODE)
2
Press
a
/
b
/
c
/
d
to adjust your desired position or select
your desired item.
3
Press
END
to exit.
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
19