18
PC INPUT mode adjustments
TitleB
Menu operations
E
PICTURE/SOUND adjustments
After connecting the PC to your TV (see page 7), you can
adjust the “PICTURE” and “SOUND” modes to your
preference setting with the following steps.
1
Press
b
on the remote control unit to display the
“EXT. SOURCES MENU” screen.
2
Press
a
/
b
to select “PC INPUT”, and then press
OK
to display PC image on your TV.
3
For PICTURE setting:
Press
MENU
or
Red
to display PICTURE setting.
1
Press
a
/
b
to select your desired PICTURE item.
(CONTRAST/BRIGHTNESS/PHASE/CLOCK)
2
Press
c
/
d
to adjust the item to your desired position.
3
Press
END
to exit.
For SOUND setting:
Press
Green
to display SOUND setting.
1
Press
a
/
b
to select your desired SOUND item.
(VOLUME/BALANCE/LOUDNESS/DYNAMIC BASS/
MODE)
2
Press
c
/
d
to adjust your desired position or select your
desired item.
3
Press
END
to exit.
E
Image position
After connecting the PC to your TV (see page 7), you can
adjust a picture’s horizontal or vertical position with the
following steps.
1
Perfor m steps 1 to 2 in
PICTURE/SOUND
adjustments
.
2
Press
a
/
b
/
c
/
d
to centre the image by moving to
H.POS/V.POS.
Resolution
Vertical Frequency 60Hz
O
O
O
O
O
O
O
O
O
640
g
400
720
g
400
640
g
480
848
g
480
800
g
600
1024
g
768
1280
g
720
1280
g
768
1280
g
1024
VGA
WVGA
SVGA
XGA
WXGA
SXGA
E
PC compatibility chart
✔
POWER MANAGEMENT
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down
(Standby mode) if no image signal is received from the PC
in the PC input mode.
E
POWER CONTROL
Power control setting allows you to save energy.
✔
NO SIGNAL OFF
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down if
no signal inputs for 15 minutes.
✔
NO OPERATION OFF
Menu Operation: SETUP Group C (page 15)
When set to “ON”, the power will automatically shut down if
no operation for 3 hours.
Useful adjustment settings and features
LC-26/32/37GA6E(E)_c
05.6.29, 7:50 AM
18
