Sharp Aquos LC-108D1U, Operation Manual

Page: 35 / 46

33
Other Viewing Options
Presetting Remote Control Function
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, VCR, DVD, LD) using
the presetting manufacturer function of your remote
control unit.
2
3
44
5
1
6
7
8
9
10
12
11
13
14
Presetting manufacturer codes
1
Press
FUNCTION
until the LED for your device
lights up.
2
After the LED for your device lights up, press
FUNCTION
and
DISPLAY
at the same time to
enter the code registration mode. The LED will
blink.
3
Press
0
–
9
to enter the manufacturer code. (See
page 34.)
Preset mode is fi nished once the LED no longer
lights up.
4
After registering the code, the LED will stop
blinking then turn off after one second. (If you
perform an incorrect operation, the LED will blink
quickly then turn off.)
•
Operating the Connected Equipment
To operate the connected equipment, press
FUNCTION
to select the LED for your device. (VCR,
AUDIO, CBL/SAT (cable converter) or DVD.) The
LED lights up, and the remote control unit button will
function as follows.
When you operate VCR or DVD, press
INPUT
to select
the terminal connected to your device.
CABLE and SAT cannot be selected at the same time.
1 SOURCE POWER
Turns the connected equipment power on and off.
2
G
Rewinds the tape and allows picture search. (VCR)
Hold down to go in reverse. (DVD)
3 REC
Starts recording. (VCR)
4
K
Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press it, you
move back to the start of the previous chapter. (DVD)
5 0
–
9
(CBL/SAT), • (DOT) (SAT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
6
I
Starts playback. (VCR, DVD)
7
J
Rapidly advances the tape and allows picture
search. (VCR)
Hold down to fast forward. (DVD)
8
F
Sets pauses and still pictures. (VCR, DVD)
9
H
Stops the tape transport. (VCR)
Playback stops when pressed. With some DVD
players, pressing the button twice may open the disc
tray. (DVD)
10
L
Pressing quickly once takes you to the start of the
next chapter. Each time you press it, you move
ahead to the start of the next chapter. (DVD)
11 FLASHBACK
Press to switch between the current channel and
the channel you were watching immediately before.
Some manufacturers do not preset FLASHBACK.
(CBL)
12 CH
r
/
s
Press
CH
r
or
CH
s
to tune in to a higher or lower
channel. (CBL)
Press to select the channel of the TV tuner on the
VCR. (VCR)
13 MENU
When this button is pressed, the DVD menu will
display.
14
a
/
b
/
c
/
d
,
ENTER
a
/
b
/
c
/
d
:
Press the button to select items on the
SAT GUIDE screen or SAT MENU screen. (SAT).
Press the button to select items on the DVD MENU
screen. (DVD)
ENTER:
Press to activate the selected function.
(SAT, DVD)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LC-108D1U̲E.indb 33 LC-108D1U̲E.indb 33 2008/04/04 18:15:26 2008/04/04 18:15:26