Sharp Aquos LC-108D1U, Operation Manual

Page: 19 / 46

17
Direct Button Operation
Changing Volume
You can change the volume by pressing
VOL
k
/
l
on the LCD Monitor or on the remote control unit.
To increase the volume, press
VOL
k
.
To decrease the volume, press
VOL
l
.
20
Audio status
Output device
Output Select
Fixed Variable
Speaker
Variable sound Mute
When "Output Select" is set to "Variable", the indicator
on the screen changes as shown below.
60
See page 31 for details on the Output Select function.
MUTE
Mutes the current sound output.
Press
MUTE
.
" " will be displayed on the screen for 30 minutes, and
the sound is silenced.
Within 30 minutes of pressing
MUTE
, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press
VOL
k
/
l
or
MUTE
.
Mute will be canceled after 30 minutes have passed.
However, the LCD Monitor will not suddenly output a
loud sound as the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press
SLEEP
.
The remaining time displays when the sleep timer has
been set.
Each time you press
SLEEP
, the remaining time
switches as shown below.
Off 30 60 90 120
When set, the time automatically starts counting down.
If you want to adjust the sleep timer, you can press
SLEEP
twice then change the time setting.
Five minutes before the time expires, the remaining time
displays every minute.
Select "Off" by pressing
SLEEP
to cancel the sleep
timer.
The LCD Monitor will enter standby when the remaining
time reaches zero.
When the sleep timer is set, its indicator on the LCD
Monitor lights red.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LC-108D1U̲E.indb 17 LC-108D1U̲E.indb 17 2008/04/04 18:15:16 2008/04/04 18:15:16