Sharp AQUOS CRYSTAL 2, User Manual

Page: 62 / 190

60
Calling
How to dial directly to make a call and answer a call, as well
as options when a call is arriving/during a call are described.
(Handset does not support Video Call.)
Support for VoLTE and HD Voice
Handset supports VoLTE and HD Voice for high-quality call
sound. See "
Using VoLTE " for details.
Call Caution
Handset is equipped with a "Direct Wave Receiver" which
transmits sound by vibrating Display. Do not place a
sticker, shield, etc. on Display; other party's voice may
become hard to hear. See "
Call Window Layout/In-Call
Operation " for details.
Placing Calls
In Feel Home, (Phone) Dial
Dialpad window opens.
・When missed call window appears, Tap
. If Feel Home
returns, perform again.
Use onscreen dialpad to enter number
・Include area code for landline numbers.
・To correct number, Tap
to delete digit(s), then enter
correct number.
CALL
Handset dials the number.
・Call begins when other party answers.
・For in-call operations and cautions, see "
Call Window
Layout/In-Call Operation ."
To end call, Drag End call down
Call ends.
・If "Screen locked" is not shown on Display, Tap
End call .
・After calls to/from numbers not saved in Address Book, a
window to add an unsaved number to Address Book appears.
Follow onscreen prompts.
Troubleshooting
Q. Call does not connect
A. Did you dial all digits for the number? Dial all digits
for numbers starting with a "0" area code, etc.
A. Is the signal weak? Change locations and call again.