Sharp AQUOS CRYSTAL 2, User Manual

Page: 186 / 190

184
Drying Handset
After exposing handset to water, be sure to dry Mic/Recorder
Mic, Mic, Recorder Mic, Speaker, Earphones-Microphone Port
and External Device Port.
Wipe handset surface with dry cloth
Holding handset firmly by its sides, shake it about 20 times
・When shaking handset, hold it firmly so as not to drop it.
Pat against dry cloth to remove moisture from openings and
grooves
・Water may be trapped in openings; pat against a dry cloth
to remove it.
Leave handset on dry cloth for approximately 2 - 3 hours at
room temperature
Cautions
When Removing Moisture
Do not put a cotton swab, cloth, etc. into openings; water
resistance may be affected.
After Drying Procedure
Do not use handset in wet conditions.
・Calls may fail, or moisture may transfer to clothes, bag,
etc.
・Moisture may short-circuit Earphones-Microphone Port,
External Device Port or other parts.
・Exposure to cold may freeze moisture and cause
malfunction.