AL-2051 SIMULATION, TROUBLE CODES 10 - 23
48
01
Front/rear (main scanning)
direction and scan (sub
scanning) direction
magnification ratio
adjustment
[Function]
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direc-
tion.
Enter the adjustment value with [Numeric] key. Press [START] key to save the set value and
make a copy. (When the adjustment value is increased by 1, the magnification ratio is increased
by 0.1%.)
The adjustment mode can be changed by pressing [
] [
] key.
(Adjustment range
:
1 – 99, Default
:
50)
[Operation]
The operation is similar to simulation 46-01.
05
RSPF mode sub scan
direction magnification ratio
in copying
[Function]
Used to display the current RSPF mode sub scan direction magnification ratio on the LCD/dis-
play.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a
copy is made. (When the set value is increased by 1, the magnification ratio is increased by
0.1%.)
The adjustment mode can be changed by pressing [
] [
] key. (Adjustment range
:
1 – 99,
Default
:
50)
When adjusting the RSPF, the mode is set to "Duplex
→
Single," single copies of two sheets are
performed.
For printing, regardless of the density mode and the density level,
Density mode = MANUAL
Density level = 3
* When there is no document in RSPF, copy is inhibited.
[Operation]
The operation is similar to simulation 46-01.
Main
code
Sub
code
Contents
Details of function/operation
Mode
Display item
LED
Default
Main scan direction magnification ratio
F-R
PRINT mode lamp
50
OC mode sub scan direction
magnification ratio
SCAN
SCAN mode lamp
50
Mode
Initial value of
duplex setting
Display item
LED
Default
Sub scan magnification ratio
adjustment on the front surface of
RSPF document
S-S
SIDE1
COPY mode
lamp
50
Sub scan magnification ratio
adjustment on the back surface of
RSPF document
D-S
SIDE2
PRINT mode
lamp
50