AL-2051 SIMULATION, TROUBLE CODES 10 - 20
46
19
Exposure mode setup
[Function]
<
γ
table setting>
When this simulation is executed, the code number of the current set gamma table is displayed.
(Default
:
2)
Enter the code number corresponding to the desired gamma table, and press [
] [
] key to
change the mode and write into the EEPROM.
<AE operation mode>
When setting the
γ
table, press [
] key to change to the AE operation mode, and the current
set code number of the AE operation mode is displayed. (Default
:
0)
Enter the code number corresponding to the desired AE operation mode and press [
] [
]
key to change the mode and write into the EEPROM.
<PHOTO image process setting>
When [
] key is pressed in AE operation mode setting, the mode is changed to the PHOTO
image process setting and the code number of the current set PHOTO image process setting is
displayed. (Default
:
1)
Enter the code number corresponding to the desired PHOTO image process setting and press
[
] [
] key to change the mode and write into the EEPROM.
[Operation]
The operation is similar to simulation 43-01.
20
RSPF exposure correction
[Function]
Used to adjust the exposure correction amount in the RSPF mode. The adjustment is made by
adjusting Vref voltage variation for the OC mode.
When this simulation is executed, the current set value is displayed in 2 digits (Default
:
50).
Change the set value and press [START] key to save the setting and make a copy.
When the set value is increased, copy becomes darker. When the set value is decreased, copy
becomes lighter. (Adjustment range
:
1 – 99)
[Operation]
The operation is similar to simulation 46-01.
Main
code
Sub
code
Contents
Details of function/operation
Mode
Display item
Code number
Setting content
Remark
γ
GAMMA
1
Image quality priority mode
2
Toner consumption priority mode
Default
AE
AE
0
Lead edge stop
Default
1
Real time process
PHOTO
PHOTO
1
Error diffusion process
Default
2
Dither process
Mode
Display item
Default
Remark
RSPF
SPF
50