AL-2051 USER PROGRAM 11 - 2
Print mode
* The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
16
KEY TOUCH SOUND
1: LOW
2
:
HIGH
3
:
OFF
• This sets the volume of beep signals.
17
SOUND AT DEFAULT
1
:
ON
2: OFF
• Use this to sound a beep when a base setting is selected.
18
TONER SAVE MODE
1
:
ON
2: OFF
• This mode reduces toner usage by about 10% when copying. Toner save
mode is effective when the exposure mode is AUTO or TEXT.
19
AE LEVEL ADJUST
1
:
SPF/RSPF
(Adjustment to 5
levels is possible)
2
:
DOCUMENT GLASS
(Adjustment to 5
levels is possible)
• This is used to adjust the exposure level.
• The automatic exposure level can be adjusted separately for the docu-
ment glass and the RSPF.
• The factory default setting for the exposure level is "center".
20
LANGUAGE
1: AMERICAN
ENGLISH
2
:
ENGLISH
3
:
FRENCH
4
:
SPANISH
5
:
GERMAN
6. ------
:
18
:
Brazilian portuguese
This is used to set the language used in the display.
18 Languages can be selected.
21
RESET FACTORY
1
:
Yes
2: No
This is used to return all settings to the factory default settings.
22
SORT AUTO SELECT
1: ON
2
:
OFF
Use this setting to enable or disable sort auto select mode.
24
CHECK RSPF OPEN
1: ON
2
:
OFF
• You can set the operation that takes place if the [START] key (
) is
pressed when the RSPF is not completely closed.
25
VALID COPY WIDTH
1: A4
2
:
B5
• Set the allowed paper sizes for copying from the bypass tray. When "B5"
is selected, a copy of a letter size original will only be printed up to invoice
size.
28
LSU SETTING
1: ON
2
:
OFF
• Select whether copying is only allowed when the polygon motor is rotat-
ing, or also when the polygon motor is stopped.
29
PAPER TYPE
1
:
PLAIN PAPER
2: HEAVY PAPER
• Set the temperature of the fusing unit when the bypass tray is used. Nor-
mally "PLAIN PAPER" should be selected.
30
DISPLAY CONTRAST
1
:
LIGHTER
2
:
LIGHT
3: NORMAL
4
:
DARK
5
:
DARKER
• Set the contrast of the display.
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
FORCED OUTPUT
1
:
ON
2: OFF
When this function is enabled, printing in printer mode will automatically
continue using a different size of paper if the specified size of paper runs out
in all trays. This feature does not function in copy mode.
2
USB 2.0 MODE
SWITCH *
1
:
FULL-SPEED
2: HI-SPEED
This sets the USB 2.0 data transfer speed. To obtain the fastest speed when
using the USB 2.0 connector, first verify that your computer meets the
system requirements (operating system and driver), and then use this
program to change the USB 2.0 mode to "Hi-Speed". Note that the setting
should not be changed while running a TWAIN driver.
3
AUTO TRAY SWITCH
1: ON
2
:
OFF
This is selectable when the optional paper tray is installed.
(This is not shown when the optional tray is not installed.)
4
ENABLE TCP/IP
1: ON
2
:
OFF
This is to select whether or not to make the network connection by TCP/IP
protocol effective.
5
ENABLE DHCP
1: ON
2
:
OFF
This is to select whether or not to apply to DHCP network connection.
6
IP ADDRESS SETTING
1: IP ADDRESS
2
:
SUBNETMASK
3
:
DEFAULT GATEWAY
This is to set IP address, Subnetmask and Default Gateway from the
machine. This can also be used to check the machine
’
s IP ADDRESS when
"IP ADDRESS" is selected. When the program number 4 "ENABLE DHCP"
is "ON" and the machine is under DHCP environment, the IP address on the
display is shown with "
" at the tail end.