Display reports regarding failures and changes for timer
settings.
You can check the current version of the software on the
screen.
86
Appendix
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
ENTER
.
4
Press
c
/
d
to select “Yes”, and then press
ENTER
.
• “Now, TV will restart automatically. OK?” displays
on the screen.
6
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
c
/
d
to select “Yes”, and then press
ENTER
.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
7
Reset
Receiver report
If you have already set the password, enter it
here.
• “Return to factory pre-settings” displays on the
screen.
5
Information
Message list
When a new broadcast station is detected, the message is
updated in the “Message list” of the “Information” menu.
Press
a
/
b
to select the desired language
listed on the screen, and then press
ENTER
.
Press
c
/
d
to select “HOME” or “STORE”,
and then press
ENTER
.
8
9
Press
c
/
d
to select “Digital Search” or
“Analogue Search”, and then press
ENTER
.
10
The TV searches for, sort and stores all the
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press
RETURN
.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 8 to change to
“HOME” mode.
• “Reset” is greyed out in 3D mode. To select the “Reset” menu, you
need to switch to 2D mode.
Download setup
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Go to “Menu”
s
“Setup”
s
“View setting”
s
“Individual
setting”
s
“Standby search”
s
“Download setup”.
Selected item
Description
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
Selected item
Description
Yes
Starts downloading immediately.
Typically, it takes approximately 30
minutes for download. You cannot carry
out other operations while downloading.
• Cancels the download by pressing
ENTER
on the remote control unit when
“Discontinue” is displayed on the screen
during the update.
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
• Updating the software may take several hours in the worst case.
• The TV must remain in standby mode for download. Do not turn off
the power using
POWER
on the TV.
Press
b
/
c
/
d
to select “View setting”.
3
Now initialising...
After factory presetting,
TV will restart automatically
Identifi cation
If the software is updated, the confi rmation
message “New download information has
been detected.” appears.
• If the TV receives the update service while in
standby mode, a confi rmation message displays
after turning on the power.
1
Follow the screen prompts.
2
NOTE
• If there are unread messages in the “Message list”, “New
information” is displayed on “Channel display”. (See page 23.)
60X50H_en_ID5.indd 86
60X50H_en_ID5.indd 86
2011-6-13 17:20:21
2011-6-13 17:20:21
