Sharp 14AG2-DC, Operation Manual

Page: 8 / 26

7
Dimension: 176 x 250mm
14AG2DC (01-08)EN
ENGLISH
TV/VIDEO
1
2 3
4
5 6
7 8
0
9
Basic Operation (continued)
(2) Battery Operation
Turn on the DC Power
TV/VIDEO
1
2 3
4
5 6
7 8
0
9
! @
@
POWER
indicator
!
Press the DC Power. The battery indicator will appear green.
@
Press the STANDBY/ON (
B
) button on the remote control or any
of the CHANNEL UP (CH
r
) or DOWN (CH
s
) button on the TV
set.
The POWER indicator changes from Dark red to Red and a
picture appears on the screen.
DC power switch/ Battery Indicator
Green: Battery Operation mode
Red:
Battery charge warning mode
If the indicator appears red, battery voltage is low. The
battery needs recharging.
• This set can only be used for a 12V car battery. Do not use for a 24V battery.
• Battery voltage will turn to DC POWER OFF for protection when it reaches below 11V.
• Power will not turn on even if the battery indicator appears red when the voltage is below 11V.
• When not using the battery, remove the battery clip to avoid battery drain.
• Battery power is disabled while using AC power.
• Wipe any dirt from the battery terminal completely before connecting.
• Do not place any object (such as an antenna rod) besides the battery clip near the battery terminal.
• If you connect both the battery and AC power, AC power will have priority. In case of power failure, it automati-
cally switches to DC power. As soon as AC power recovers, it will switch back to AC power.
• The operating time of the battery varies with the type, brightness and volume. 75AH battery can last for about
10 hours after a full charge.
• Colour shading may occur while using the DC battery. In such case, turn on the power using the AC power and
then switch to DC power.
Connect the red battery clip
to (+) on the battery terminal.
Connect the black battery clip
to (–) on the battery terminal.
12V CAR BATTERY
RED
BLACK
12V
L