420 774 335 397 www.sharks-shop.cz
Stránka 51
CUTTER SETTING STANDARDS
WARNING:
Be sure to wear safety gloves.
Before filing:
Make sure the saw chain in held securely
Make sure the engine is stopped
Use a round file of proper size for your chain.
Place your file on the cutter and push straight forward. Keep the file position as illustrated.
After every cutter has b een set, check the depth gauge and file it to the proper level as illustrated.
WARNING!
Be sure to round off the front edge to reduce
the chance of kickback or lie-strap breakage.
Make sure every cutter has the same length
and edge angles as illustrated.
Guide bar
●
Reverse the bar occasionally to prevent partial wear.
●
The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and
the outside of a cutter. If a gap is observed between them the rail is normal. Otherwise, the rail is
worn. Such a bar needs to be corrected or replaced.