DMR transceiver
7
After this, the LED will be slowly flashing white indicating that the device has
entered access point (AP) mode and it's broadcasting its own Wi-Fi network
called
openSPOT4 AP
:
The AP mode is the openSPOT4's default mode of operation if no Wi-Fi
networks are configured. AP mode lets you configure a Wi-Fi network which the
openSPOT4 will connect to. You can enable AP mode later anytime by pressing
the
for about 3 seconds - until the status LED turns white,
indicating that AP mode has started.
Connecting the openSPOT4 to a Wi-Fi network
Connect your web browser device (phone/tablet/computer) to the Wi-Fi
network called
openSPOT4 AP
.
If there is no Wi-Fi network called
openSPOT4 AP
, then make sure the
openSPOT4 is in AP mode (
). You can switch
between AP and normal mode anytime by pressing the
for 3
seconds.
Also make sure the openSPOT4 is placed close to your
phone/tablet/computer.
The initialization setup opens automatically:
If the initialization setup won't open automatically, then you can open it by
entering
into the web browser while your browser
device is connected to the Wi-Fi network
openSPOT4 AP
. Note that this IP
address only works while the openSPOT4 is in AP mode (indicated by white
status LED), and your browser device is connected to the
openSPOT4 AP
Wi-Fi network.
Select the country of operation, then click on the
Next
button. The Wi-Fi
network select screen will be displayed:
Summary of Contents for openSPOT
