DMR transceiver
120
Factory reset
Hold the Wi-Fi button for 30 seconds
to perform a full factory reset. In this
case all configuration profiles will be cleared.
Please only use your fingers, or a ballpoint pen to press the buttons. Don't
use sharp items like a needle!
Factory reset using the web interface
The openSPOT4 can be reset to factory defaults if you click on the
Reset all
for at least 30 seconds (until the LED turns off, and the openSPOT4
reboots). These methods will reset all configuration profiles to the default
settings.
If you only want to reset the active configuration profile to defaults, you can use
the
Reset config profile
button at the bottom of the
page, or you can
enter the
cfr
command.
Summary of Contents for openSPOT
