DMR transceiver
30
The following setup is described using the Yaesu FT2D's menu structure. The
menu structure of your transceiver may be different, but the names of the
settings should be the same or similar.
Enabling the GPS receiver
Go to
DISP
>
APRS®
>
GPS POWER
and select
ON
.
Enabling GPS data sending during voice calls
Go to
DISP
>
TX/RX
>
DIGITAL
>
LOCATION SERVICE
and select
ON
.
Now your radio will transmit location information during your calls if it has a
GPS fix and you hold the PTT for at least 2-3 seconds. The openSPOT4 will
automatically set an SSID and symbol for location reports based on the
transceiver type in the received location data.
Advanced settings
If you want to select your own APRS® symbol, SSID and comment for your
transceiver then enable
Advanced mode, go to the Connectors page, open the
APRS® connector settings, and enable forced SSID/symbol/comment.
Summary of Contents for openSPOT
