manualshive.com logo in svg

SharkRF openSPOT, User Manual

Share
Download
SharkRF openSPOT User Manual Download Page 131

DMR transceiver

130

Web interface call audio playback is choppy

Note that smooth call audio playback requires a Wi-Fi connection with a good
signal quality. If you have issues with call audio playback, then please try using
different browsers and make sure they are updated to the latest version.

Browsers reduce CPU allowance on non-active tabs after a while. The tab of the
web interface must be kept active, otherwise the audio will be garbled. This
browser behavior cannot be changed. If the audio becomes garbled, activate the
tab, and/or reload the web interface to fix it.

Battery depletes too quickly

Please make sure to charge the battery full. If the battery is fully charged then
the power LED is off and the charging status displays "ready". The length of the
discharge time is affected by a lot of things.

The battery will discharge faster if:

The device is transmitting or receiving
There's traffic on the connected Wi-Fi network (even if the traffic is not
to/from the openSPOT4)
Wi-Fi signal quality
Cross mode is used on the openSPOT4 Pro
Web interface is opened

Summary of Contents for openSPOT











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands