Shark 100 Installation & Operation Manual Download Page 97

Page: 97 / 194

Doc

E145701

6 - 5

6: Using the Shark® 100 Meter

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

2. Press the

Enter

button from the Main Menu to view the Parameters screen for the

mode that is currently active.

6.2.3: Using Reset Mode

1. Press the Enter button while rSt is in the A window. The

“rSt (Reset) ALL? no” screen appears.

• If you press the

Enter

button again, the Main Menu

appears, with the next mode in the A window. (The

Down

button does not affect this screen.)

• If you press the

Right

button, the “rSt ALL? YES” screen

appears. Press

Enter

to perform a reset.

CAUTION!

All

Max and Min values will be reset.

NOTE:

If Password protection is enabled for reset, you must

enter the four digit password before you can reset the meter
(see Chapter 6 for information on Password protection).
To enter a password, follow the instructions in Section
6.2.4.

2. Once you have performed a reset, the screen displays

“rSt ALL donE” and then resumes auto-scrolling
parameters.

MENU

ENTER

MENU

ENTER

MENU

ENTER

Summary of Contents for 100



































































































































































































Search results

Summary of Contents for 100

Reviews:

Shark 100, Installation & Operation Manual, Page: 97 / 194

Search results

Summary of Contents for 100

Reviews: