Shark 100 Installation & Operation Manual Download Page 133

Page: 133 / 194

Doc

E145701

7 - 9

7: Using the Shark® 100B Meter

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

You can also change the following fields:

• Network Mask - the subnet mask. The default is 255.255.255.0.

• Default Gateway - the IP address of the gateway. The default is 10.0.0.224.

• BACnet UDP Port - the BACnet/IP UDP port number. The default is 47808. In

some cases, e.g., if it is necessary for two groups of BACnet devices to be set up
independently on the same IP subnet, the UDP port can be configured locally to
a different value.

• BACnet Device Number - a numeric code used to identify the meter. This number

is auto-generated from the MAC address.

• BBMD IP Address - when a BBMD IP address is entered here it enables Foreign

Device mode.

• BACnet Device Location/Application - a readable string of up to 63 characters

that you can use to find the Device Object Name.

Summary of Contents for 100



































































































































































































Search results

Summary of Contents for 100

Reviews:

Shark 100, Installation & Operation Manual, Page: 133 / 194

Search results

Summary of Contents for 100

Reviews: