Shark 100 Installation & Operation Manual Download Page 120

Page: 120 / 194

Doc

E145701

6 - 28

6: Using the Shark® 100 Meter

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Power Direction: View as Load or View as Generator

Demand Averaging

Averaging Method: Block or Rolling

Interval (Minutes): 5, 15, 30, or 60

Sub Interval (if Rolling is selected): 1-4

Auto Scroll

Click to set On or Off.

Display Configuration:

Click Values to be displayed.

NOTE:

You MUST select at least ONE.

NOTE:

If incorrect values are entered on this screen the following message appears:

WARNING: Current, CT, PT and Energy Settings will cause invalid energy accumulator
values.
Change the settings until the message disappears.

Summary of Contents for 100



































































































































































































Search results

Summary of Contents for 100

Reviews:

Shark 100, Installation & Operation Manual, Page: 120 / 194

Search results

Summary of Contents for 100

Reviews: