Shark 100 Installation & Operation Manual Download Page 194

Page: 194 / 194

Doc

E145701

E - 8

E: Using the USB to IrDA Adapter CAB6490

Electro

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

NOTE:

If the Adapter doesn't show up under Modems, move it away from the

meter for a minute and then position it pointing at the IrDA, again.

2.Double-click on the Standard Modem over IR link (this is the USB to IrDA Adapter).

You will see the Properties screen for the Adapter.

3.Click the Modem tab. The Com Port that the Adapter is using is displayed in the

screen.

4.Use this Com Port to connect to the meter from your PC, using the Communicator

EXT

software. Refer to Chapter 5 of the

Communicator EXT

Software User Man-

ual

for detailed connection instructions.

Summary of Contents for 100



































































































































































































Search results

Summary of Contents for 100

Reviews:

Shark 100, Installation & Operation Manual, Page: 194 / 194

Search results

Summary of Contents for 100

Reviews: