background image

GB

appendice

page 1

I

D

F

E

General instructions

Read the instructions in this handbook carefully, as they give important information regarding

safety during installation, use and maintenance.

Be sure to keep this instruction manual with the fixture in order to consult it in the future. If

the fixture is sold or given to another operator, make certain that it always has its manual, to

enable the new owner to read about its operation and relative instructions.

• This unit is not intended for home use.

• After having removed the packaging, check that the fixture is not damaged in any way. If in

doubt, don’t use it and contact an authorized SGM Technical Service Centre.

• Packaging material (plastic bags, polystyrene foam, nails, etc.) must not be left within chil-

dren’s reach, as it can be dangerous.

• This fixture must only be operated by adults. Do not allow children to tamper or play with it.

• Electrical work necessary for installing the fixture must be carried out by a qualified electrician

or experienced person.

Never use the fixture under the following conditions:

- In places subject to excessive humidity

- In places subject to vibrations or bumps.

- In places with a temperature of more than 45°C or less than 2°C

- Protect the fixture from excessive dryness or humidity (ideal conditions are between

35% or more 85%).

• The fixture must not be installed less than 1.5m. from the surface or object to be lit.

• Do not dismantle or modify the fixture.

• Make certain that no inflammable liquids, water or metal objects enter the fixture.

• Should any liquid be spilled on the fixture, disconnected the power supply to the lighting con-

trol desk immediately.

• In the event of serious operating problems, stop using the fixture immediately and either con-

tact the nearest SGM sales point for a check or contact the manufacturer directly.

• Do not open the fixture - there are no user serviceable parts inside.

• Never try to repair the fixture yourself. Repairs by unqualified people could cause damage or

faulty operation. Contact your nearest authorized service centre. 

Always insist that original spare parts are fitted.

Safeguard the environment: don’t throw batteries,

accumulators or packaging material into your waste

bin - return them to your reseller or take them to the

nearest special waste collection point.

Summary of Contents for Giotto WASH 1200
















Reviews: