background image

GB

appendice

page 

11

I

D

F

E

4. Giotto control channels

4.1 – Ch 01/02 – Pan

DMX channels 1 and 2 control the fixture’s Pan in LSB and MSB mode respectively.
The two channels are used together for 16-bit commands, and only channel 2 is used for 8-bit
commands (see chapter 3).

4.2 – Ch 03/04 – Tilt

DMX channels 3 and 4 control the fixture’s Tilt in LSB and MSB mode respectively.
The two channels are used together for 16-bit commands, and only channel 4 is used for 8-bit
commands (see chapter 3).

4.3 - Ch 5 - Colour wheel + Conversion filter

Giotto has a wheel fitted with five high
quality selected dichroic colour filters
(ø51.8 mm), which can be used indivi-
dually or along with the colour conver-
sion filter and CMY colour mixing
system. Channel 5 also controls the
3.200°K colour conversion filter (ideal for
television use) which can also be used
over the colours created by the CMY
system.

4.4 - Ch 6 - CMY system - Cyan Wheel

This channel is part of the CMY colour mixing group, which creates colours using an additive
method; i.e. superimposing the three basic colours from which it takes its name: Cyan, Magenta
and Yellow.
This channel gives continuous regulation of the Cyan colour wheel’s addition. 
Possible values go from 0 to 255.

4.5 - Ch 7 - CMY system - Magenta wheel

This channel is part of the CMY colour mixing group, which creates colours using an additive
method; i.e. superimposing the three basic colours from which it takes its name: Cyan, Magenta
and Yellow.
This channel gives continuous regulation of the Magenta colour wheel’s addition. 
Possible values go from 0 to 255.

0

÷

22

Value

Colour / Conversion Filter

white
green

pink

23

÷

42

43

÷

63

amber

blue

64

÷

84

85

÷

105

orange

3.200

°

K conv. filt.

106

÷

127

128

÷

149

blue + 3.200

°

K conv. filt.

amber + 3.200

°

K conv. filt.

150

÷

170

171

÷

192

pink + 3.200

°

K conv. filt.

green + 3.200

°

K conv. filt.

193

÷

212

213

÷

233

3.200

°

K conv. filt.

234

÷

255

Summary of Contents for Giotto WASH 1200
















Reviews: