background image

page 

12

4.6 - Ch 8 - CMY system - Yellow wheel

This channel is part of the CMY colour mixing group, which creates colours using an additive
method; i.e. superimposing the three basic colours from which it takes its name: Cyan, Magenta
and Yellow.
This channel gives continuous regulation of the Yellow colour wheel’s addition. 
Possible values go from 0 to 255.

4.7 – Ch 9 – Dimmer

Channel 9 controls Giotto’s dimmer. This system for regulating the amount of light emitted uses a
combination of electronic and mechanical regulation, ensuring extremely precise regulation.
Possible values go from 0 to 255 (respectively 0 and 100%).

4.8 - Ch 10 - Shutter and Strobe

This channel controls the opening and
closing of the shutter and the Giotto’s
strobe effect. The strobe is enabled
according to the values shown on the
table alongside.

4.9 – Ch 11 – Zoom

The Giotto’s 200mm. Fresnel lens is the hub of the Zoom effect and thanks to its motor, enables
the aperture of the fixture’s light beam to be regulated smoothly.

0

÷

15

Value

Shutter / Strobe

shutter closed

strobe - 0.5Hz

strobe - 1.42Hz

16

÷

31

32

÷

47

strobe - 1.7Hz

strobe - 2Hz

48

÷

63

64

÷

79

strobe - 2.42Hz

strobe - 2.9Hz

80

÷

95

96

÷

111

strobe - 3.46Hz
strobe - 4.15Hz

112

÷

127

128

÷

143

strobe - 4.89Hz
strobe - 5.93Hz

144

÷

159

160

÷

175

strobe - 6.91Hz
strobe - 8.29Hz

176

÷

191

192

÷

207

strobe - 9.95Hz

strobe - 11.83Hz

208

÷

223

224

÷

239

shutter open

240

÷

255

0

Value

Zoom

zoom in (18

°

 angle)

linear variation

zoom out (35

°

 angle)

0

÷

255

255

Summary of Contents for Giotto WASH 1200
















Reviews: