SGM
GB
User’s manual 1.02
Giotto 1500
- 44 -
PROFILE
CONFIGURATION
Menu
Option
Description
DMX SETUP
ADDRESS XXX
Range 001-456
Fixture addressing
ON
Enables the DMX WIRELESS
WIRELESS
OFF
Disable the DMX WIRELESS.
WIRELESS LOGOFF SET
Disable the previous WIRELESS setting.
ON
Enables the wireless signal output on the DMX OUT port.
WIRELESS EXIT
OFF
Disables the wireless signal output on the DMX OUT port.
Range 8-
600sec
It’s possible to set the number of second for which the fixture’s
last operating status must be held when there is no DMX signal.
DMX DELAY
UNL
Always maintains the fixture’s last operating status no matter
for how long there is no DMX signal.
DMX
DMX signal selected.
Automatic selection of the signal.
SIGNAL
RS-232
RS-232 signal selected.
Automatic selection of the signal.
ARTNET SETUP
IP ADDRESS1
IP ADDRESS1=0
Set up first byte ip address for Artnet network
IP ADDRESS2
IP ADDRESS2=0
Set up second byte ip address for artnet network
IP ADDRESS3
IP ADDRESS3=0
Set up third byte ip address for Artnet network
IP ADDRESS4
IP ADDRESS4=0
Set up fourth byte ip address for Artnet network
SUBNET MASK1
SUBNET
MASK1=0
Set up first byte subnet mask for Artnet network
SUBNET MASK2
SUBNET
MASK2=0
Set up second byte subnet mask for Artnet network
SUBNET MASK3
SUBNET
MASK3=0
Set up third byte subnet mask for Artnet network
SUBNET MASK4
SUBNET
MASK4=0
Set up fourth byte subnet mask for Artnet network
SUBNET
SUBNET=0
Set up subnet for Artnet network
UNIVERSE
UNIVERSE=0
Set up universe for Artnet network
PAN-TILT SETUP
NORMAL
Normal PAN control of left to right PAN movement.
PAN MOVE
REVERSE
Inverted PAN movement control (from right to left).
PAN POS MIN
Range 000-526
Sets PAN movement start position. Default configuration = 000
degrees.
PAN POS MAX
Range 004-530
Sets PAN movement stop position. Default configuration = 530
degrees.
NORMAL
Normal control of TILT from up to down.
TILT MOVE
REVERSE
Inverted TILT movement control (from down to up).
TILT POS MIN
Range 000-246
Sets TILT movement start position. Default configuration = 000
degrees.
TILT POS MAX
Range 004-250
Sets TILT movement stop position. Default configuration = 250
degrees.
ON
Data regarding Pan controls Tilt and vice versa.
PAN TILT SWAP
OFF
Normal control of Pan and Tilt movement.
16
bit
bitEnable the Pan\Tilt movement resolution 16 bit.
PAN TILT RES
8 bit
bitEnable the Pan\Tilt movement resolution 8 bit.
TRACKING
Traking operating mode. Mspeed channel is disabled.
SPEED CONTROL
VECTOR
Vector operating mode. Mspeed channel is enabled.
SPEED
100% - 92%
84% - 76%
Allows to slow maximum Pan and Tilt speed.
Default configuration = 100%
Fast
Optimises speed performance.
ACCELLERATION
Slow
Optimises smooth movement.