GB
SGM
Giotto 1500
User’s Manual 1.02
- 27 -
2.13
Access to internal components
All work must ALWAYS be carried out by qualified technical personnel.
ATTENTION!! make certain that the fixture is switched off and that there is
no risk of burns due to high component temperature (wait at least 30
minutes after switching off)
To access internal components, proceed as follows:
1.
Place the head of the Giotto 1500 in a vertical position (Pict.1)
2.
Use a screwdriver to loosen screws 1, 2, 3 and 4 (Pict.1)
3.
Extract the cover "A" (Pict.2) outwards.
If necessary, repeat the same procedure for cover "B"
Pict. 1
Pict. 2
1
2
3
4
Lato B
Lato A