20
Connecting to a DMX control device
The G-Wash is controllable using a DMX control device and it can be connected using either a DMX cable or via the fixture’s
built-in LumenRadio CRMX wireless receiver system.
If using a cabled DMX system, connect the DMX in cable (with male 5-pin XLR plug) and out cable (with female
5-pin XLR
plug) to the DMX data link. Terminate the DMX out cable of the last fixture in the data link. For outdoor installations, use only
IP-rated XLR connectors suitable for outdoor use.
Connect both DMX in and DMX out cables in order to maintain the fixture IP65.
At the end of the DMX link use an IP-65 rated DMX terminator.
