49
Notes
1. ‘Pre-heat’ enabled = ready for instant operation.
2. ‘Pre-heat’ disabled = to perform a complete blackout, use ‘Open 2’. This will take 400 milliseconds to exit.
3. All other channels must be zero and this has to be held for 30 sec. (fixture will wake up on a full reset).
4. Set LED frequency refresh rate, see seperate documentation for frequencies, see manual for details
value must be hold to keep setting (default value 1,41 kHz)
5. Hold for 3 sec to capture scenes for internal program (stand-alone operation) see manual for details.
6. Aperture settings can be set for two scenarios, optimized for maximum output and optimized for highest projection quality.
Channel
Name
DMX Value
DMX Percentage
Description
Info
Default
DMX
Value
Fader
Type
16
Control
Channel
192
195
75,3%
76,5%
Capture Scene 20
See note 5
0 (0%)
Snap
196
199
76,9%
78,0%
Capture Scene 21
200
203
78,4%
79,6%
Capture Scene 22
204
207
80,0%
81,2%
Capture Scene 23
208
211
81,6%
82,7%
Capture Scene 24
212
255
83,1%
100,0%
Reserved (No Function)
