15
Installation / Rigging
WARNING!
Always secure elevated fixtures with a safety cable.
The G-Wash may be installed in any orientation.
Always use two Omega brackets to rig the fixture. Lock each
bracket with both 1/4-turn fasteners. The fasteners are locked only
when turned fully clockwise.
Always fasten safety cables between the load-bearing support
structure and the attachment points on the fixture. The safety
cables must be able to bear at least 10 times the weight of the
fixture.
CAUTION
:
• Always use two safety wires.
• Min. safety wire gauge = 5 mm.
• Max. safety wire length (free fall) = 30 cm (11 in.)
• Make sure the slack of the safety wire is at a minimum.
• Never use the carrying handles for secondary attachment.
