- 19 -
5-3-2. Setting “Capacity of Load Cell”
After “CAPA” is displayed, Check the max Capacity of your load cell.
(Refer the label on the load cell, or test report.)
Input the Max Capacity of Load cell. And press
key.
In case of multiple pieces of load cells are installed, make sum of each load cell’s capacity
and make setting with max capacity.
Ex)
If there are 4pcs of load cells, and each load cell’s Max capacity is 1,000kg.
Then, total Max Capacity will be 4,000kg (1,000 x 4) and you have to input 4,000.
5-3-3. Setting “Digit / Division” value
After “DIVI” is displayed, select Decimal point with
key.
Whenever you press
key, decimal point will be changed.
And select Division optimal division with
key.
Finally press
key to save and move to next step.
0.1
diui
Capa
15
